Products and Services

  1. 350 Watt CW 0.7-6.0 GHz Solid-State Amplifier: 350S1G6

    AR’s 350S1G6 is a solid-state broadband amplifier covering the 0.7 to 6.0 GHz frequency range. When used with a sweep generator, this Class A, self-contained, air-cooled amplifier provides a minimum of 350 watts RF power. The low level of spurious signals and linearity make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems.

  2. Broadband Amplifier Systems: 7000 Series

    Ophir RF’s 7000 series consists of ten different broadband amplifier systems covering a wide frequency range. Each model features variations in output power, harmonics, spurious signal parameters, and more. These amplifiers are ideal for both military and commercial applications.

  3. Ultra-Broadband Power Amplifier
    The CHPA0618-1 ultra-broadband power amplifier incorporates gallium arsenide (GaAs) monolithic microwave integrated circuit (MMIC) technology into CAP’s revolutionary, patented Spatium™ broadband spatial combining architecture to achieve outstanding solid state power levels across the amplifier’s extended 6-18 GHz frequency range.
  4. Gallium Nitride Broadband RF Power Amplifier: SSPA 0.020-1.000-100
    Aethercomm Model Number SSPA 0.020-1.000-100 is a high power, broadband, Gallium Nitride (GaN) RF amplifier that operates from 20 MHz to 1000 MHz. The bandwidth of this amplifier can be extended to 1200 MHz+ with similar performance. This PA is ideal for broadband military platforms as well as commercial applications because it is robust and offers high power over a multi-octave bandwidth. This amplifier was designed for broad band jamming and communication systems platforms.
  5. Solid State Broadband High-Power RF Amplifier: Model 4136

    OPHIR RF’s model 4136 is a 50 Watt broadband amplifier designed for applications operating in the 6.0-18 GHz frequency range. This amplifier utilizes Class A linear power devices that provide an excellent 3rd order intercept point, high gain, and a wide dynamic range.

  6. 30 - 88 MHz Tx/Rx Booster Amplifier: AR-50SE

    AR’s Model AR-50SE is designed as a fully automatic band-switching RF booster amplifier for multi-band tactical radio equipment. Covering the 30 to 88 MHz frequency band, this amplifier uses high speed auto switching filters to assure harmonic suppression.

  7. 10000 Watt CW, 80 - 1000 MHz Solid-State Amplifier: Model 10000W1000A

    The 10000W1000A self-contained, air-cooled, broadband, solid-state amplifier is ideal for applications where instantaneous bandwidth and high gain are required. When used with an RF sweep generator, this amplifier will nominally provide over 10000 watts of power. The device also utilizes push-pull circuitry in the interest of lowering distortion and improving stability.

  8. Model 7001 Broadband RF Power Amplifier
    The 7001 is a 25W multi channel broadband system that covers the 20 - 3000 MHz frequency range with a single RF output port.
  9. 8000 Watts Pulse, 1 - 2 GHz Solid State Pulsed Amplifier: Model 8000SP1G2

    The Model 8000SP1G2 from AR is a self-contained, forced-air-cooled, broadband solid-state amplifier that operates over the 1 to 2 GHz frequency range, and is designed pulse applications at low duty factors where instantaneous bandwidth and high gain are required. The low level of spurious signals and linearity of this device makes the 8000SP1G2 ideal for test and measurement, (including EMC RF pulse susceptibility testing), industrial and university research and development, and service applications.

  10. Solid State Broadband High Power Amplifier: Model 5228

    Ophir RF’s 5228 Solid State Broadband High Power RF Amplifier operates in the 80 to 1000 MHz frequency range and achieves high efficiency operation and proven reliability. This amplifier features an excellent 3rd order intercept point, high gain, and a wide dynamic range. All Ophir RF amplifiers come with an extended multiyear warranty. Download the available datasheet for additional information.