Products and Services

  1. 75 – 110 GHz Bench Top Amplifier: Model STB-7531142515-1010-S1

    SAGE Millimeter offers the Model STB-7531142515-1010-S1 broadband benchtop driver amplifier operating over the 75 to 110 GHz frequency range for use in bench top power amplification, antenna range, and power boosting applications. The amplifier features a typical small signal gain of 25 dB, a nominal P1dB of +15 dBm and Psat of +18 dBm.

  2. 500 Watts CW Solid-State Amplifier: 500W1000B

    This solid-state amplifier covers the 80 MHz to 1000 MHz frequency range and uses push-pull circuitry in its higher power stages in order to lower distortion and improve stability. It’s particularly well suited for applications that require an amplifier with high gain and instantaneous bandwidth.

  3. Gallium Nitride Broadband RF Power Amplifier: SSPA 0.020-0.520-125
    Aethercomm Model Number SSPA 0.020-0.520-125 is a high power, broadband, Gallium Nitride (GaN) RF amplifier that operates from 20 MHz to 520 MHz. This PA is ideal for broadband military platforms as well as commercial applications because it is robust and offers high power over a multi-octave bandwidth. This amplifier was designed for broad band jamming and communication systems platforms.
  4. Class A Broadband Amplifier: CBA 100M-400

    This Class A design of this broadband amplifier results in a system with high reliability and low distortion linear performance across the frequency range. It also ensures that the CBA-100M-400 Broadband Amplifier will continuously operate at full power, even when presented with an open or short circuit as its output.

  5. Broadband Amplifier Systems: 7000 Series

    Ophir RF’s 7000 series consists of ten different broadband amplifier systems covering a wide frequency range. Each model features variations in output power, harmonics, spurious signal parameters, and more. These amplifiers are ideal for both military and commercial applications.

  6. Model NP-507: Broadband Linear RF Amplifier
    Designed for linear application in the 10 to 1000 MHz range. This amplifier utilizes RF Power MOSFET devices that provide high gain, wide dynamic range and an excellent 3rd order intercept point. Suggested applications: multi-carrier, pulse, AM & FM modulation.
  7. 10,000 Watt RF Power Amplifier: 10000A225A-A

    This RF power amplifier offers 10,000 watt CW and covers the 10 kHz to 225 MHz frequency range. It’s ideal for applications that involve RF susceptibility testing, antenna and component testing, communications, watt meter calibration, plasma generation, particle accelerators, and for use as a driver for high power amplifiers.

  8. 80-1000 MHz Solid-State Amplifier: 1000W1000F

    This self-contained solid-state amplifier covers the 80 MHz to 1000 MHz frequency range and features lowered distortion and improved stability through the use of push-pull circuitry. When used in conjunction with an RF sweep generator, this amplifier can provide 1000 watts (min) of swept power.

  9. dB-4409 Dual Band TWT Amplifier

    The dB-4409 is a 9-inch, pod-mounted, dual-band Traveling Wave Tube Amplifier (TWTA) operating in the 2 to 18 GHz frequency range and providing 300 Watts, continuous wave power.

  10. 0.7 - 6 GHz Solid-State Broadband Amplifier: Model 500S1G6

    The Model 500S1G6 from AR is a solid-state broadband amplifier that operates over the 0.7 to 6 GHz frequency range, and is designed for applications where instantaneous bandwidth, high gain, and linearity are required. The low level of spurious signals and linearity of this device makes the 500S1G6 ideal for use as a driver amplifier in testing wireless and communication components and subsystems, and EMC testing applications.