Products and Services

  1. Broadband RF Power Amplifier: 5 MHz to 1000 MHz
    10/15/2012

    The 5322 broadband RF power amplifier is small, lightweight, and designed for lab environments. It operates in the 5 to 1000 MHz frequency range and has a 15 W (typ) saturated output power. This amplifier has a +43 dB (min) small signal gain, +45 dBm (typ) IP3, -20 dBc (typ) harmonics @ 5 watts, and <-60 dBc (typ) spurious signals @ 5 watts. Additional specifications can be found on the available datasheet.

  2. 500 Watts CW Solid-State Amplifier: 500W1000B
    7/1/2013

    This solid-state amplifier covers the 80 MHz to 1000 MHz frequency range and uses push-pull circuitry in its higher power stages in order to lower distortion and improve stability. It’s particularly well suited for applications that require an amplifier with high gain and instantaneous bandwidth.

  3. 2900 - 3500 MHz Solid State Broadband High-Power Amplifier With 20% Duty Cycle: SKU 2214
    6/13/2019

    Empower RF Systems offers the SKU 2214 solid state broadband high-power amplifier designed to produce a minimum output of 8kW peak pulsed power with 20% duty cycle. The 2900 - 3500 MHz pulsed amplifier features multiple high power GaN devices that provide wide frequency response, high gain, high peak power capability, and low distortions. Exceptional performance, long-term reliability and high efficiency are achieved by employing advanced broadband RF matching networks and combining techniques, EMI/RFI filters, and all qualified components.

  4. Broadband Amplifier Systems: 7000 Series
    10/15/2012

    Ophir RF’s 7000 series consists of ten different broadband amplifier systems covering a wide frequency range. Each model features variations in output power, harmonics, spurious signal parameters, and more. These amplifiers are ideal for both military and commercial applications.

  5. 20-1000 MHz Solid State Broadband Power Amplifier: BBM2E4AKO (SKU 1193)
    5/31/2012

    This solid state broadband power amplifier operates in the 20-1000 MHz frequency range and delivers 100W output power. It’s ideal to use as a broadband power amplifier building block in electronic attack, digital communications, and test and measurement applications in the UHF/VHF frequency bands

  6. Gallium Nitride Broadband RF Power Amplifier: SSPA 0.020-1.000-100
    12/20/2010
    Aethercomm Model Number SSPA 0.020-1.000-100 is a high power, broadband, Gallium Nitride (GaN) RF amplifier that operates from 20 MHz to 1000 MHz. The bandwidth of this amplifier can be extended to 1200 MHz+ with similar performance. This PA is ideal for broadband military platforms as well as commercial applications because it is robust and offers high power over a multi-octave bandwidth. This amplifier was designed for broad band jamming and communication systems platforms.
  7. 8000 Watts Pulse, 1 - 2 GHz Solid State Pulsed Amplifier: Model 8000SP1G2
    10/3/2018

    The Model 8000SP1G2 from AR is a self-contained, forced-air-cooled, broadband solid-state amplifier that operates over the 1 to 2 GHz frequency range, and is designed pulse applications at low duty factors where instantaneous bandwidth and high gain are required. The low level of spurious signals and linearity of this device makes the 8000SP1G2 ideal for test and measurement, (including EMC RF pulse susceptibility testing), industrial and university research and development, and service applications.

  8. 600 - 6000 MHz Solid State Broadband High-Power Amplifier: SKU 2222
    7/10/2019

    Empower RF Systems offers the SKU 2222 solid state broadband high-power amplifier designed for multi-octave bandwidth high power CW, modulated and pulse applications. The 600 - 6000 MHz, 50 W amplifier employs advanced broadband RF matching networks and combining techniques, EMI/RFI filters, and qualified components for exceptional performance, long-term reliability, and high efficiency in operation.

  9. 10000 Watt CW, 80 - 1000 MHz Solid-State Amplifier: Model 10000W1000A
    4/27/2016

    The 10000W1000A self-contained, air-cooled, broadband, solid-state amplifier is ideal for applications where instantaneous bandwidth and high gain are required. When used with an RF sweep generator, this amplifier will nominally provide over 10000 watts of power. The device also utilizes push-pull circuitry in the interest of lowering distortion and improving stability.

  10. Broadband RF Power Amplifier: Model 7000
    5/7/2012

    This is a four channel, broadband power amplifier that operates in the 1MHz to 2.5 GHz frequency range.