Products and Services

  1. Class A Broadband Amplifier: CBA 100M-400
    7/18/2012

    This Class A design of this broadband amplifier results in a system with high reliability and low distortion linear performance across the frequency range. It also ensures that the CBA-100M-400 Broadband Amplifier will continuously operate at full power, even when presented with an open or short circuit as its output.

  2. Gallium Nitride Broadband RF Power Amplifier: SSPA 0.020-1.000-100
    12/20/2010
    Aethercomm Model Number SSPA 0.020-1.000-100 is a high power, broadband, Gallium Nitride (GaN) RF amplifier that operates from 20 MHz to 1000 MHz. The bandwidth of this amplifier can be extended to 1200 MHz+ with similar performance. This PA is ideal for broadband military platforms as well as commercial applications because it is robust and offers high power over a multi-octave bandwidth. This amplifier was designed for broad band jamming and communication systems platforms.
  3. 0.7 - 6 GHz Solid-State Broadband Amplifier: Model 500S1G6
    11/16/2015

    The Model 500S1G6 from AR is a solid-state broadband amplifier that operates over the 0.7 to 6 GHz frequency range, and is designed for applications where instantaneous bandwidth, high gain, and linearity are required. The low level of spurious signals and linearity of this device makes the 500S1G6 ideal for use as a driver amplifier in testing wireless and communication components and subsystems, and EMC testing applications.

  4. Bidirectional V- And U-Band Amplifier: NuPower Xtender™ VU4GX02
    10/3/2017

    The NuPower Xtender™ VU4GX02 from NuWaves is a small, broadband, high-performance RF embedded OEM amplifier designed specifically for extending the communication range of half-duplex transceivers with constant-envelope waveforms. It is able to generate 4 Watts of linear RF power across the V- and U-band frequencies from 225 to 512 MHz, as well as 10 Watts of RF transmit power.

  5. 50 MHz – 20 GHz Ultra-Broadband High-Performance Amplifier: Model BBA-0005-20000
    8/30/2017

    The new Model BBA-0005-20000 ultra-broadband amplifier designed to cover the 50 MHz to 20 GHz frequency range in a single unit for applications in test measurement, electronic countermeasures, scientific research, as well as communication equipment. This new model draws only 180 mA from a 12V DC supply, exhibits 27 dBm third order intercept and output VSWR down to 1.5:1, and features a reverse isolation of 60 dB.

  6. Broadband Low-Noise Amplifier: SKY67159-396LF
    5/20/2015

    The SKY67159-396LF is an ultra-broadband low-noise amplifier designed for FDD and TDD 2G/3G/4G LTE small-cell base stations. With features such as superior gain flatness, exceptional linearity, and an internal active bias circuitry, this LNA offers the ability to externally adjust supply current and provide stable performance over temperature and process variation.

  7. Broadband RF Power Amplifier: 5 MHz to 1000 MHz
    10/15/2012

    The 5322 broadband RF power amplifier is small, lightweight, and designed for lab environments. It operates in the 5 to 1000 MHz frequency range and has a 15 W (typ) saturated output power. This amplifier has a +43 dB (min) small signal gain, +45 dBm (typ) IP3, -20 dBc (typ) harmonics @ 5 watts, and <-60 dBc (typ) spurious signals @ 5 watts. Additional specifications can be found on the available datasheet.

  8. Broadband Amplifier Systems: 7000 Series
    10/15/2012

    Ophir RF’s 7000 series consists of ten different broadband amplifier systems covering a wide frequency range. Each model features variations in output power, harmonics, spurious signal parameters, and more. These amplifiers are ideal for both military and commercial applications.