Filters Products

  1. Standard And Custom High Performance Cavity Filters: NuFilter™ Series
    11/21/2017

    NuWaves Engineering offers the NuFilter™ series of cavity filters designed for applications operating within the 1 GHz to 20 GHz frequency range. Options for standard and custom models include 3 dB bandwidths from 3% to 28%, stop-band rejections of 80 dB, insertion losses of < 1 dB, and up to 50 W power handling (higher power ratings available upon request).

  2. Airborne K-Band Strip Line Filter
    8/9/2017

    Corry Micronics now offers the CMIBPF-23G-2G, a new strip line bandpass filter with a center frequency of 23 GHz designed specifically as a lightweight filter for communication drones. This K-band filter is unique in that it features a surface mountable design, pick and placed characteristics, and installation with standard off the shelf solders.

  3. 60 MHz High Power Band 41 BAW Filter: QPQ1300
    5/8/2018

    Qorvo’s QPQ1300 is a high performance bulk acoustic wave (BAW) bandpass filter specifically designed for sub band 41 (60 MHz BW) applications. Features include low insertion loss, high rejection, high attenuation, and a compact, RoHS compliant 5.00 x 5.00 x 0.93 mm packaging.

  4. 2.4 GHz Wi-Fi/BT/LTE Co-Existence BAW Filter: QPQ1907
    9/4/2018

    Qorvo’s QPQ1907 is a high-performance, high power Bulk Acoustic Wave (BAW) band-pass filter designed to enable coexistence of WiFi and LTE signals within the same device or in close proximity to one another. This device is ideally used in WiFi/Bluetooth, consumer premise equipment (CPE), small cells, and smart meter applications.

  5. Corry Micronics Super Speed USB3.1 Filter Module Interfaces
    1/24/2019

    Corry Micronics has developed a lab grade filter module that passes the super speed USB3.1 at 10Gbps designed specifically for LTE band rejection.  The CFM1-USB31-C and CFM1-USB31-AB are designed to pass data between USB 2.0, USB 3.0 and USB 3.1 devices at up to 10 Gbps while rejecting conducted and radiated interference and noise.  These products are used with an RF shielded enclosure or shielded room to isolate products undergoing testing that require an electrically quiet environment.

  6. MtronPTI Iridium Band Filter
    5/8/2018

    MtronPTI offers the new Iridium Band Filter for aviation, maritime, land mobile, IoT, and military communications applications. These narrow bandwidth, high rejection band filters are designed to isolate Iridium frequencies from outside interference.

  7. 52 GHz Waveguide Filters
    4/18/2018

    Corry Micronics, Inc. (CMI) offers a series of 52 GHz Waveguide Filters designed for operation in the 10 GHz to 60 GHz frequency range for cellular and satellite communication system, avionics communications, radar, and other high-power applications.

  8. High Power Switched LC Filter Assembly
    5/18/2018

    MtronPTI offers a high power switched LC filter assembly designed to reduce the overall mechanical footprint, and improve electrical performance and power handling. These filters feature high power, reduced component count, better isolation, higher RF shielding, and low insertion loss.

  9. Cellular Band Switched Filter Module With Optional Amplification: CMIINV-5BT2-RM
    7/18/2018

    Corry Micronics offers the CMIINV-5BT2-RM cellular band switched filter module with optional switched amplification for monitoring the transmit or receive Band 1, Band 2, Band 5, Band 13, and Band 17 cellular signals. Features include high out of band rejection specifications, high band to band isolation of 50 dB minimum, low noise figure, and standard 50 ohm impedance.

  10. Teledyne Defence And Space Filters
    9/13/2017

    Teledyne Microwave Solutions offers a range of filters for defense and space applications. Filter types include electro-mechanical filters, fixed filters, fast tuned notch filters, and TDS bandpass filters.