Products and Services

  1. Power And Driver Amplifiers: Series AMP

    Millitech’s series AMP power amplifiers are designed to obtain high output power in the 18-110 GHz frequency range through the use of advanced PHEMT MMICs and transistors. These multiple MMIC amplifier chips can be combined or cascaded for applications requiring higher gain or greater output power than standard products.

  2. 600 – 6000 MHz Solid State Broadband High Power Amplifier: SKU 2223

    Empower RF Systems offers the SKU 2223 solid state broadband high power amplifier designed for multi-octave bandwidth high power CW, modulated and pulse applications. The 600 – 6000 MHz, 150 W amplifier employs advanced broadband RF matching networks and combining techniques, EMI/RFI filters, and qualified components for exceptional performance, long-term reliability, and high efficiency in operation.

  3. High-Power CW/Pulsed RF Amplifier
    Aethercomm Model Number SSPA 0.35-0.50-1000- RM is a high power CW or pulsed RF amplifier that operates from 350 to 500 MHz in a rack mounted configuration. This rack mount product is capable of operation from VHF to UHF in bands.
  4. 100 Watt Wideband RF Power Amplifier: KAW2020M16

    The Model KAW2020M16 is a Class AB wideband RF power amplifier delivering in excess of 100 Watts into a 50-Ohm load over the frequency range of 220 MHz to 245 MHz. Power gain is a minimum of 50 dB minimum. The system features forward and reflected power indication on a front panel-mounted analog meter; over-drive protection; full VSWR protection, over-temperature protection, over-voltage, and over-current. System is CW rated with fast keying option less than 100nsec on/off time. The Model KAW2020M16 is a 19-inch rack-mount unit, 3.5 inches high and 20 inches deep. Construction is completely modular; all subassemblies are readily removable. The amplifier operates from 100-240 VAC, 47-63 Hz line.

  5. 7.5 – 18 GHz TWT Amplifier: dB-3911

    The dB-3911 power-combined TWT Amplifier (TWTA) uses two wideband, periodic permanent magnet (PPM)-focused TWTs to amplify CW, AM, FM or pulse-modulated signals. Compared to a single TWT approach, the dB-3911 provides higher saturated output power and improved harmonic performance.

  6. 2110 – 2170 MHz Linear Power Amplifier: SKY66184-11

    The SKY66184-11 is a 2110 – 2170 MHz high-linearity lower amplifier designed for FDD 3G/4G LTE small cell base stations that operate within the 2100 to 2200 MHz frequency range. It is also useful for active distributed antenna systems, cellular repeaters, and driver amplifiers. The amplifier features fully matched input/output, high gain, and an active biasing circuitry that is integrated to compensate its performance over temperature, voltage, and process variation.

  7. 3400 – 3600 MHz Wide Instantaneous Bandwidth High-Efficiency Power Amplifier: SKY66313-11

    Skyworks offers the SKY66313-11 fully input/output matched power amplifier with high efficiency and a wide instantaneous bandwidth. The compact power amplifier is designed for FDD and TDD 4G LTE and 5G systems operating from 3400 to 3600 MHz. It is part of a high-efficiency, pin-to-pin compatible PA family supporting major 3GPP bands.

  8. Automatic Band-Switching RF Booster Amplifier For Tactical Radio: AR-20H

    AR Modular RF offers the AR-20H portable, fully automatic band-switching RF booster amplifier with remote keyline for multi-band VHF/UHF tactical radio equipment with legacy, proprietary, and emerging waveforms. Producing 20 Watts from a nominal 2 Watts CW/PEP radio input, the amplifier covers the frequency band of 30 – 512 MHz.

  9. 1-2 GHz Limiting Amplifier: SLA-020-60-25-SMA

    Fairview Microwave presents the SLA-020-60-25-SMA high-gain limiting coaxial amplifier with an operating frequency range from 1 to 2 GHz. Designed specifically to protect receivers from excessive power and distortion, this model features an input power range of -40 to +10 dBm, a minimum limited output power of +19 dBm, and a high 60 dB gain with gain flatness of +/-2.5 dB.

  10. DC-28 GHz GaAs pHEMT MMIC Power Amplifier: HMC994APM5E

    Analog Devices offers the new HMC994APM5E GaAs pHEMT MMIC distributed wideband power amplifier that is ideal for test instrumentation, military, space, and fiber optics applications. The amplifier operates within the DC to 28 GHz frequency range, and provides 15 dB of gain, +29 dBm of saturated output power, and 25% PAE from a +10V supply.