Products and Services

  1. dB-4409 Dual Band TWT Amplifier
    1/25/2012

    The dB-4409 is a 9-inch, pod-mounted, dual-band Traveling Wave Tube Amplifier (TWTA) operating in the 2 to 18 GHz frequency range and providing 300 Watts, continuous wave power.

  2. 2.4 GHz ZigBee®/Thread/Bluetooth® Smart Front End RFIC: BFM4120
    7/29/2019

    Berex offers the BFM4120 compact, multi-function Front-End RFIC (Radio Frequency Integrated Circuit) designed for 802.15.4 ZigBee™/ Thread, Bluetooth® Smart, and ISM wireless protocol systems in the 2.4 GHz band. The device combines a transmit power amplifier, receive low noise amplifier, a single-pole double-throw transmit/receive switch.

  3. 1 to 6 GHz Solid State Power Amplifiers
    11/12/2014

    MtronPTI recently released a line of broadband, solid-state, power amplifiers covering the 1 to 6 GHz range with up to 100 Watts power. Each model in the series is well-suited for broadband jamming, LTE laboratory testing, and public safety and military communication applications. They're built with GaN technology, and their mechanical designs ensure high reliability under rugged operating conditions.

  4. Ultra Wideband High Power Amplifier: BBS3G6QHM (SKU 2135)
    2/8/2012
    This high power amplifier is ideal for laboratory, RFI/EMC susceptibility testing, RF/MW component testing, and ultra broadband high power linear applications. It features 50 ohm input/output impedance, high reliability and ruggedness, suitability for CW, AM, and FM, a small form factor and a lightweight, built-in control, monitoring and protection circuits, and a solid-state Class A linear design.
  5. High Power Gallium Nitride (GaN) Amplifier: SSPA 2.0-4.0-100
    1/11/2011
    Aethercomm Model Number SSPA 2.0-4.0-100 is a high power, Gallium Nitride (GaN) amplifier that operates from 2000 MHz to 4000 MHz minimum and is packaged in a rugged enclosure. This amplifier is designed for operation in harsh environments. Typical output power is 100 watts across the band at P3dB. Small signal gain is 54 dB ± 3.0 dB across the band typically. Input and output VSWR is 2.0:1 maximum. This unit is equipped with DC switching circuitry that enables and disables the RF devices inside the amplifier in 540 nSec typical for turn on and 230 nSec typical for turn off time. Standard features include reverse polarity protection, output short and open circuit protection, and over/under voltage protection. There is a temperature sensor internal to this amplifier with thermal shut down to protect the unit.
  6. RF And Microwave Space Qualified Components
    11/23/2015

    Teledyne Microwave Solutions' (TMS) earned the space community's trust by developing, providing, and supporting the industry's most comprehensive line of space-qualified products. TMS' quality certifications include MIL-PRF-38534, Classes H & K (TRB Option). 

  7. Power Amplifier with Unrivaled Size and Power Advantages: Model 2170
    11/28/2018

    This amplifier covers the 1 to 3 GHz frequency range while delivering 1 kW of broadband output power in a 5U, air-cooled chassis. Its performance and size make it an ideal solution for test and measurement, electronic warfare, and communications applications. More specifically, it’s designed for octave bandwidth high power CW, modulated, and pulse applications.

  8. Micro L- And S-Band Power Amplifier: NuPower™ LS5MI03
    11/20/2019

    The NuPower™ LS5MI01 Micro L- & S-Band power amplifier offers the smallest form factor of the NuPower family of PAs at 1.62 in3. This highly efficient solid-state power amplifier provides over 5 watts of RF power across both L and S frequency bands. Based on the latest gallium nitride (GaN) technology, the NuPower’s power efficiency and miniature form factor make it ideal for size, weight, and power-constrained broadband RF telemetry and tactical communication systems.

  9. High Power RF Amplifiers: 700 MHz to 2.1 GHz
    10/20/2015

    Corry Micronics’ line of high power RF amplifiers feature up to 40% efficiency, an extended temperature range of -20oC to 55oC for MIL-STD applications, and status monitoring signals that provide diagnostic information.

  10. 60 – 90 GHz E-band Low-Noise Power Amplifier: AFB-E27HP-01
    6/22/2017

    Ducommun offers the AFB-E27HP-01 ultra-broadband, low-noise power amplifier (LNPA) that covers the millimeter-wave E-band (60 – 90 GHz) for applications such as research, telecommunications, astronomy, remote sensing and imaging, and test and medical instrumentation.