Products and Services

  1. C-Band Low Noise Amplifier (LNA)

    NIC’s C-Band Low Noise Amplifier features high gain, P1dB output, a low noise figure, and a hermetically sealed package. It boosts signal strength in ground, air-borne, and ship-mount applications.

  2. High-Power Switch LNA Module: QPB9325

    Qorvo offers the QPB9325 highly integrated front-end module with operation in the 3.6 – 3.8 GHz frequency range ideally suited for TDD base station, wireless infrastructure, and macro or picocell base station applications. This LNA module integrates RF functional blocks such as a pin-diode based high power switch along with two LNA stages.

  3. Low Noise, Low Current Amplifier: SKY67015-396LF

    This low noise amplifier (LNA) covers the 0.03 to 0.3 GHz frequency range and features low NF (0.8 dB @150 MHz), 18.5 dB @150MHz gain, a flexible supply voltage from 1.8 to 5.0V, improved NF and linearity, and an adjustable supply current for higher IIP3.

  4. Low Noise Amplifiers With High Linearity Offerings: MGA Series
    Avago presents four low-noise amplifiers (LNAs) to extend the RF performance and diversity of its market-leading LNA portfolio. The new modules feature high linearity that improves an application’s ability to distinguish between desired signals and spurious signals received close together. The MGA-6x606 LNAs target WiFi and WiMAX data cards, handsets and other portable devices, while the two-stage MGA-13x16 LNAs target GSM, CDMA and W-CDMA cellular infrastructure applications such as base station radio cards.
  5. Low Noise Millimeter Wave Amplifiers (LNA)

    Low noise amplifiers (LNAs) from Millitech feature state-of-the-art noise figure performance, wideband coverage, a modular, compact design, internal voltage regulation and bias circuitry, and 2.92, 2.4, 1.85 mm or Waveguide interfaces (as required).

  6. 40 MHz – 1 GHz Broadband CATV Low-Noise Amplifiers

    Skyworks introduces two new broadband, 75 Ohm MMIC front-end, low-noise amplifiers (LNAs). The SKY65452-92LF and the SKY65450-92LF (with bypass mode) provide high linearity and excellent gain over a wide frequency range of 40 MHz to 1 GHz with minimal external components. In addition, these LNAs offer low current consumption, low noise figure, and deliver energy-saving features.

  7. 20 MHz to 8 GHz Gain Block Amplifier: AM1022

    Atlanta Micro’s AM1022 is an unconditionally stable gain block amplifier covering the 20 MHz to 8 GHz frequency range. It features 13 dB gain, a 2.0 dB noise figure, +24 dBm OIP3, +12/+15 dBm P1dB, and a 1.8V, 26 mA or +3.3V, 45 mA power supply.

  8. Ultra-Low-Noise Flat Gain LNA: TQL9092

    The TQL9092 from Qorvo is a flat-gain, high-linearity, ultra-low-noise amplifier (LNA) optimized for the 0.6 – 4.2 GHz frequency range, but can operate as low as 600 MHz. This LNA provides a gain flatness of 2 dB over a bandwidth range of 1.5 to 3.6 GHz, and can be biased from a positive supply that ranges from 3.3 to 5 volts.

  9. Two Stage, High Linearity and High Gain Low-Noise Amplifier: SKY67107-306LF

    This low-noise amplifier (LNA) operates in the 2.3-2.8 GHz frequency range and features active bias and high linearity performance. In addition to the high linearity, the output stage also provides high gain. The advanced GaAs pHEMT enhancement mode front end device provides ultra-low Noise Figure. Stable performance over temperature and process variation are a direct result of the amplifier’s active bias circuitry.

  10. High Linearity Wideband LNA in a Miniature Form Factor: µHILNA™: 50 to 1500 MHz, 20 dB Gain

    NuWaves’ µHILNA™ is a high linearity, wideband LNA (low noise amplifier) with a form factor of 1.00″ x 0.75″ x 0.50”. In addition to its miniature size, the LNA features reverse voltage protection, a ruggedized, fully characterized assembly, application diverstity, high intercept, a wide dynamic range and wide operational voltage range, multi-octave frequency coverage, reverse voltage protection, low cost, and much more.