Product Showcase

  1. Solid State Broadband High-Power RF Amplifier: Model 4136

    OPHIR RF’s model 4136 is a 50 Watt broadband amplifier designed for applications operating in the 6.0-18 GHz frequency range. This amplifier utilizes Class A linear power devices that provide an excellent 3rd order intercept point, high gain, and a wide dynamic range.

  2. 0.5 – 8.0 GHz Low Noise MMIC Amplifier: CMA-83LN+

    Mini Circuits offers the CMA-83LN+ low noise MMIC amplifier operating from 0.5 to 8.0 GHz for sensitive, high-dynamic range receiver applications. The amplifier offers flat gain and a P1dB of 20.3 dBm at 2 GHz with a noise figure of 1.3 dB. It operates on a single 5 V or 6 V supply and is well matched f to 50 ohms.

  3. GaN Doherty Hybrid Amplifier: RPAM35008-25

    RFHIC offers the RPAM35008-25 fully integrated micro-strip Doherty GaN hybrid power amplifier module for applications in 5G massive MIMO systems, small cells, and low power remote radio heads. Operating over the 3400 – 3600 MHz frequency range, this 2-stage power amplifier module features 50 ohm matched input and output and can deliver up to 50 W of saturation power.

  4. MIL-DTL-17 High Reliability RF Cable Assemblies

    Fairview Microwave offers a new series of high-reliability, military-grade RF cable assemblies ideally used in defense and aerospace, transportation, and communications industries. These MIL-DTL-17 RF cable assemblies are designed for avionics, military electronics, satellite ground station, and autonomous vehicle applications.

  5. High Power Gallium Nitride (GaN) Amplifier: SSPA 20.0-24.0-40

    RFMW offers Aethercomm’s Model SSPA 20.0-24.0-40 as a high power, Gallium Nitride (GaN) amplifier that operates from 20 – 24 GHz. This amplifier is designed for operation in applications with high shock and vibration requirements. Typical output power is 40 watts, and power gain is 46 dB with input and output VSWR is 2.0:1 maximum.

  6. Turn-Key Contracting Services And Support

    Corry Micronics offers over 40 years of experience in customized customer services, support, and product solutions. As an industry leader in electronic component design and manufacturing, CMI’s quality of work and customer attention continues to exceed our customers’ expectations.

  7. High Density Interconnects (HDi)

    MagaPhase offers the High-Density Interconnect (HDi) product line with a variety of connector configurations to system designers to optimize packaging miniaturization while maintaining electrical and mechanical robustness. These solutions are based on snap-in interfaces, SMP, SMPM and SMPS per MIL-STD-348B, and are ideal for applications requiring lighter weight, high densities, and higher performance.

  8. Connected Home

    Wireless data helps turn the idea of a smart home into reality. Skyworks’ products allow homeowners greater control over their environment with a host of connected devices including thermostats, security systems, touch pads, security sensors, light switches, smoke and CO alarms, major appliances, and door locks.

  9. DC – 30 GHz Distributed Driver Amplifier: CMD292

    Custom MMIC offers the CMD292 wideband GaAs MMIC distributed driver amplifier die for applications operating in the DC to 30 GHz frequency range. The amplifier offers 13 dB of gain with a corresponding output 1 dB compression point of +27 dBm, and an output IP3 of 33 dBm at 15 GHz.

  10. Two Stage, High Linearity And High Gain Low-Noise Amplifier: SKY67180-306LF

    The SKY67180-306LF low-noise amplifier (LNA) operates in the 1.5 – 3.8 GHz frequency range and features active bias and high linearity performance. In addition to the high linearity, the output stage also provides high gain. The advanced GaAs pHEMT enhancement mode front end device provides ultra-low noise figure. Stable performance over temperature and process variation are a direct result of the amplifier’s active bias circuitry.