Broadband Amplifiers

PRODUCTS AND SERVICES

30 - 88 MHz Tx/Rx Booster Amplifier: AR-50SE 30 - 88 MHz Tx/Rx Booster Amplifier: AR-50SE

AR’s Model AR-50SE is designed as a fully automatic band-switching RF booster amplifier for multi-band tactical radio equipment. Covering the 30 to 88 MHz frequency band, this amplifier uses high speed auto switching filters to assure harmonic suppression.

50 MHz – 20 GHz Ultra-Broadband High-Performance Amplifier: Model BBA-0005-20000 50 MHz – 20 GHz Ultra-Broadband High-Performance Amplifier: Model BBA-0005-20000

The new Model BBA-0005-20000 ultra-broadband amplifier designed to cover the 50 MHz to 20 GHz frequency range in a single unit for applications in test measurement, electronic countermeasures, scientific research, as well as communication equipment. This new model draws only 180 mA from a 12V DC supply, exhibits 27 dBm third order intercept and output VSWR down to 1.5:1, and features a reverse isolation of 60 dB.

10,000 Watt RF Power Amplifier: 10000A225A-A 10,000 Watt RF Power Amplifier: 10000A225A-A

This RF power amplifier offers 10,000 watt CW and covers the 10 kHz to 225 MHz frequency range. It’s ideal for applications that involve RF susceptibility testing, antenna and component testing, communications, watt meter calibration, plasma generation, particle accelerators, and for use as a driver for high power amplifiers.

30 Watts CW 0.7 – 6 GHz Solid-State Amplifier: 30S1G6 30 Watts CW 0.7 – 6 GHz Solid-State Amplifier: 30S1G6

AR’s 30S1G6 is a solid-sate amplifier covering the 0.7 – 6 GHz frequency range. When used with a sweep generator, it provides a minimum of 30 watts RF power. Like most of AR’s amplifiers, this model is ideal for applications that call for instantaneous bandwidth and high gain.

High-Power Broadband Gallium Nitride RF Amplifier: SSPA 0.020-6.000-35 High-Power Broadband Gallium Nitride RF Amplifier: SSPA 0.020-6.000-35
Aethercomm Model Number SSPA 0.020-6.000-35 is a high power, super broadband, Gallium Nitride RF amplifier that operates from 20 MHz to 6000 MHz. This PA is ideal for broadband military platforms as well as commercial applications because it is robust and offers high power over a multi-decade bandwidth with decent power added efficiency. This is an industry first for bandwidth, power and efficiency in a package like this. This amplifier operates from a base plate temperature -40°C to +75°C for maximum performance. It is packaged in a modular housing that is 7.65(w)” by 2.5(l)” by 1.27(h)”. This amplifier has a typical P3dB between 35 to 50 watts at room temperature.
10000 Watt CW, 80 - 1000 MHz Solid-State Amplifier: Model 10000W1000A 10000 Watt CW, 80 - 1000 MHz Solid-State Amplifier: Model 10000W1000A

The 10000W1000A self-contained, air-cooled, broadband, solid-state amplifier is ideal for applications where instantaneous bandwidth and high gain are required. When used with an RF sweep generator, this amplifier will nominally provide over 10000 watts of power. The device also utilizes push-pull circuitry in the interest of lowering distortion and improving stability.

Ku-Band Compact 3.25 kW Pulsed Amplifier: VZU3530j1 Ku-Band Compact 3.25 kW Pulsed Amplifier: VZU3530j1

The VZU3530J1 is a compact pulse amplifier that is eight rack-units tall, built specifically for test and measurement systems. Features include a modular design and built-in diagnostic capabilities, and a quiet operation mode for laboratory environments.  

Broadband RF Power Amplifier: Model 7000 Broadband RF Power Amplifier: Model 7000

This is a four channel, broadband power amplifier that operates in the 1MHz to 2.5 GHz frequency range.

More Products and Services