Fast. Accurate. USB-capable. Power sensors from Rohde & Schwarz
The most important features for accurate and simple power measurements are maximum measurement accuracy and speed, and easy operation with a base unit or PC/laptop. The R&S®NRP family combines all these features with the R&S®NRP2 base unit, R&S®NRPV virtual power meter PC software and a wide range of USB-capable power sensors.
The Anritsu MA24105A Inline Peak Power Sensor is designed to take accurate average power measurements from 2 mW to 150 W and peak power measurements from 2 W to 300 W over the frequency range of 350 MHz to 4 GHz. The sensor employs a “dual path” architecture that enables True-RMS measurements over the entire frequency and dynamic range allowing users to measure CW, multi-tone and digitally modulated signals such as LTE, LTE-TDD, GSM/EDGE, CDMA, W-CDMA, WiMAX, TD-SCDMA, WLAN, and LTE. The forward direction path also include a 4 MHz bandwidth channel that has peak and comparator/integrator circuits that add measurement functions such as PEP power, crest factor, CCDF, and burst average power. Another detection circuit on the reverse direction adds reverse power measurement capabilities including reverse power, reflection coefficient (magnitude), return-loss, and SWR. The presence of a micro-controller along with signal conditioning circuitry, ADC, and power supply in the sensor makes it a complete miniature power meter.
The MA24118A power sensor is designed to provide accurate average power measurements from 10 MHz to 18 GHz over 60 dB of dynamic range. The sensor employs a "dual path" architecture that provides (similar to thermal sensor) True-RMS measurements over the entire frequency and dynamic range, enabling users to make highly accurate average power measurements for CW, multi-tone, and digitally modulated signal up to 18 GHz. The sensors have internal and external triggering capability that facilitates individual slot power measurements of TDMA waveforms as well as burst power measurements of periodic and non-periodic waveforms.
These motion sensor modules are short range Doppler sensors that operate in the K band. They’re ideal for traffic radar systems, automatic door openers, dual mode security systems, and automatic production lines.
The MA24106A power sensor is a USB power sensor that eliminates the need of a traditional power meter. It is designed to provide accurate average power measurements from 10 MHz to 6 GHz over 60 dB of dynamic range. It is a highly accurate, standalone instrument that communicates with a PC via USB or with many of the Anritsu handheld products (often requiring Option 19). The power measurement capability of MA24106A is intended to mimic that of a traditional thermal (thermo-electric) power sensor by providing true-RMS measurements, although the MA24106A offers a wider measurement range. Therefore, it is ideal for measuring average power of CW, modulated RF waveforms such as 3G, 4G, OFDM, and multi-tone signals. True RMS power measurements enable one to make accurate measurements regardless of the input signal type.