Solid State Amplifiers

SERVICES AND PRODUCTS

"S" Series Solid-State Amplifiers "S" Series Solid-State Amplifiers

These new amplifier models employ a new design that delivers more than twice the power of older models. The new, more efficient design consumes less power, and incorporates both USB and Ethernet interfaces in addition to the standard IEEE and RS-232 interfaces.

1.0 GHz to 2.0 GHz Solid State Amplifiers: AS0102 Series 1.0 GHz to 2.0 GHz Solid State Amplifiers: AS0102 Series

This series of solid state amplifiers operates in the 1.0 to 2.0 GHz frequency range. Eleven different models are available with 30W, 55W, 65W, 100W, 125W, 200W, 250W, 400W, 500W, 800W, and 1000W P1dB levels. Like all MILMEGA amplifiers, this series is ideal for military/defense, EMC testing, communications, R&D, and high energy physics applications. Information on specifications can be found on the datasheets below.

6 – 18 GHz Amplifiers With New Internal Liquid Cooling: 20S6G18-L And 40S6G18-L 6 – 18 GHz Amplifiers With New Internal Liquid Cooling: 20S6G18-L And 40S6G18-L

AR’s new 20S6G18-L and 40S6G18-L are self-contained broadband, Class A solid-state amplifiers with a new internal liquid cooling design. The 20S6G18-L, when used with a sweep generator provides a minimum output power of 20 watts instantaneously from 6 to 18 GHz, while the 40S6G18-L version delivers 40 watts. Typical applications include radiated and conducted immunity testing, TWTA replacements, and EW.

2900 - 3500 MHz Solid State Broadband High-Power Amplifier With 20% Duty Cycle: SKU 2214 2900 - 3500 MHz Solid State Broadband High-Power Amplifier With 20% Duty Cycle: SKU 2214

Empower RF Systems offers the SKU 2214 solid state broadband high-power amplifier designed to produce a minimum output of 8kW peak pulsed power with 20% duty cycle. The 2900 - 3500 MHz pulsed amplifier features multiple high power GaN devices that provide wide frequency response, high gain, high peak power capability, and low distortions. Exceptional performance, long-term reliability and high efficiency are achieved by employing advanced broadband RF matching networks and combining techniques, EMI/RFI filters, and all qualified components.

S-Band GaN Solid State Power Amplifier S-Band GaN Solid State Power Amplifier

The VSS3607 GaN Solid State Amplifier uses GaN transistors to provide high gain, high efficiency, and excellent pulse fidelity for pulsed radar applications. This model is designed to operate in the 2.7-2.9 GHz frequency band.

10,000 Watt RF Power Amplifier: 10000A225A-A 10,000 Watt RF Power Amplifier: 10000A225A-A

This RF power amplifier offers 10,000 watt CW and covers the 10 kHz to 225 MHz frequency range. It’s ideal for applications that involve RF susceptibility testing, antenna and component testing, communications, watt meter calibration, plasma generation, particle accelerators, and for use as a driver for high power amplifiers.

1.0 GHz to 4.0 GHz Dual Band Solid State Amplifiers: AS0104 Series 1.0 GHz to 4.0 GHz Dual Band Solid State Amplifiers: AS0104 Series

This series of solid state amplifiers have been designed to cover the 1.0 GHz to 4.0 GHz frequency range in two bands (1 GHz to 2 GHz and 2 GHz to 4 GHz). Several models are available with 30W/17W, 30W/30W, 55W/17W, 55W/30W, 55W/55W, 100W/17W, 100W/55W, 100W/100W, 200W/100W, 200W/200W, 400W/100W, and 400W/200W P1dB levels. Information on specifications can be accessed on the datasheets below.

Microwave Solid State RF Power Amplifier: Model 8100-052 Microwave Solid State RF Power Amplifier: Model 8100-052

ETS-Lindgren offers the Model 8100-052 microwave solid state power amplifier (PA) specifically designed for EMC applications that include IEC 61000-4-3, 30 V/m automotive requirements. This 500 W PA utilizes GaAs technology, and delivers an improved design and higher efficiency performance over silicon-based amplifiers.

More Services and Products