JFW’s 75SA-081 is a 75 Ohm RF switch system in a low profile benchtop enclosure type for applications in the DC-2150 MHz range. It has an RF input power of 0.5 Watts, has 2 individually controlled 1P16T normally open self-terminating electro-mechanical RF switches in a 19 inch rack mount @ 4RU high.
Qorvo’s QPC1006 is a high power single-pole triple-throw (SP3T) switch optimized for test instrumentation, electronic warfare, communications, radar, and other general purpose applications. The switch is capable of operation within the 0.15 to 2.8 GHz frequency range.
The JFW Model 50MS-367 is a 4 X 4 blocking matrix switch designed to operate in the DC-40 GHz frequency range, and is ideally suited for SATCOM and wireless 5G signal routing applications.
JFW’s Model 50S-1770+XX-TTL is a 50 Ohm electro-mechanical 1P2T RF switch designed for operating in applications from DC - 40 GHz with 2.9 mm female RF connectors. This RF switch is latching type and absorptive (i.e. self-terminating), and the latching design means there will always be one RF path set.
Skyworks new SKY5™-9256-701LF is a 4X single-pole, single-throw (4XSPST) switch is designed for antenna tuning applications requiring ultra-low ON resistance and low OFF capacitance in the 0.6 to 6.0 GHz frequency range. The switching is controlled by an integrated Mobile Industry Processor Interface (MIPI) controller.
Ducommun delivers a range of absorptive and reflective PIN diode switches for an array of applications including test instrumentation, telecommunication, radar front, WiGig application development, and wireless 5G technology. These switches feature low insertion loss, high isolation, and a fast nanosecond switching times in a complete solid state solution.
Qorvo introduces the QPC1005 single-pole, double-throw (SPDT) switch operating within the 0.15 to 2.8 GHz frequency range for radar, land mobile radio, military communication, electronic warfare, test instrumentation, and other general purpose applications. The switch typically supports 50 W input power handling at control voltages of 0/−40 V for both CW and pulsed RF operations.
Corry Micronics offers the DCR-8E eight port reflected switch designed to be remotely controlled via Ethernet to a laptop or PC. This standard broadband switch has an operating frequency of 20 MHz to 18 GHz with an insertion loss of only 4 dB, and offers excellent port-to-port isolation of a minimum of 80 dB. The DCR-8E can be custom designed for customer specific bandwidths and switching port applications.